Model CDO-5
Basic forced-air lab ovens are mass-produced and sold by many large-scale laboratory equipment distributors. But there are key differences between Cascade and other less costly, often imported lab ovens:
Independent Overtemp Failsafe Protection
The Cascade Sciences CDO-5 is equipped with a heating cutoff system that will automatically stop power to the heaters when the overtemp setting is tripped. This protection system will provide peace of mind for overnight or unattended drying processing.
Ideal Uses:
- R&D, laboratory-scale forced-air convection drying
- Decarboxylation processes
- Drying organic material. Drier material will yield better results than processing wet material. Removing as much moisture as possible pre-processing will save time in the post-process of vacuum purge and winterization.
- Lab glassware dryer
CDO-5 is purpose-built for bench-top, R&D drying and decarboxylation of material with additional features:
- Built-in Humidity Sensor assists in monitoring dryness
- Adjustable stainless steel shelves – 2 each
- NRTL Certification
- 2 each FDA temp-rated fine micron mesh bags for ground material –
Mesh bags are required to prevent oven contamination and ground material loss.
Model CDO-5
- ISO 9001
- NRTL TUV #U8 170464972 077
- CAN/CSA-C22.2 No. 61010-1:2012
+ UPD No. 1:2015-07 + UPD No. 2:2016-04 - CAN/CSA-C22.2 No. 61010-2-010:2015
- UL 61010-1:2012/R:2016-04
- UL 61010-2-010:2015
- EN 61010-1:2010
- EN 61010-2-010:2014
CDO 5 SafetyCerts Page
1 Year
Model CDO-5
All shelves are removable and adjustable.
Capacity
Volume: 4.9 Cubic Ft. / 138 Cubic Liters
Interior (W x D x H):
21” x 19.44” x 20.75”
534mm x 494mm x 527mm
Exterior (W x D x H):
34.1” x 28.1” x 38.75”
866mm x 711mm x 984mm
Temperature
Temperature Range: +2°C (36°F) above room temp to 180°C (350°F)
Temp Stability: +/-0.4 °F
Temp Uniformity @ 40°C (100°F): +/- .5°C (1°F)
Temp Uniformity @ 115°C (240°F): +/- 1°C (1.5°F)
Temp Uniformity @ 150°C (305°F): +/- 2°C (3°F)
Heat up / Stabilization Time from 25°C (77°F) to 115°C (240°F): 40 min
Airflow Exchanges: 220 per hour @ 80°C (176°F)
Linear Shelf Space Airflow: 145 Feet Per Min (44 Liters Per Min)
Air Intake:Adjustable side vents.
Air Exhaust: Adjustable. Top 2.75: Dia
Exhaust Airflow @ 80°C (176°F): 18.5 Feet Per Min (523.9 Liters Per Min)
Shelving
Comes with 2 each. Height Adjustable.
Surface Area (W x D): 20.75″ x 19″
Weight Capacity: 50lbs
Mesh Bags
Comes with 2 Temp Rated Mesh Bags
Polypropylene (PP)
Melt Temperature: 161°C (363°F)
Softening Point: 152°C (305°F)
Heat Deflection Temperature: 90°C (194°F)
Glass Transition Temperature: 0°C (32°F)
* Mesh bags are REQUIRED to prevent oven contamination and ground material loss.
* Polypropylene products produced for some filtration applications are made from resin that complies with FDA regulations for food contact. The regulation compliance is product number dependent / specific.
* Impact at cold temperatures is likely to cause strand cracking or breakage