Home Catalog CVO-5 PRO Vacuum Package

CVO-5 PRO Vacuum Package

  • Cascade

Contact Us for Pricing

SKU:CS-1901010049

The CVO-5 PRO Package oven offers incredible temperature stability for vacuum drying and purging of pharmaceuticals, botanicals, slurries, or any temperature sensitive material.

This vacuum oven will liberate solvents, water or other unwanted compounds in a small batch, R&D, laboratory environments.

The CVO-5 PRO Package is available in Stainless Steel.

Made in The USA

Vacuum ovens have been around for decades. Basic vacuum ovens are mass-produced and sold by many large laboratory equipment distributors. But there are key differences between Cascade by Agrify and other less costly, often imported vacuum ovens:

Exceptional Temperature Control & Stability
The Cascade by Agrify CVO-5 uses a unique control logic not found in most lab grade vacuum ovens. The temperature probe is INSIDE the oven, which minimizes temperature overshoot and delivers best-in-class temperature stability and uniformity particularly in the low temperature ranges. Accurate, stable temps throughout the CVO-5 eliminate hot and cold spots, making accurate use of every inch of shelf space.

Touchscreen Smart Controller
The CVO-5 controller is a flat panel touch screen with controls that minimize temperature overshoot. When the oven door is open, the controller will wait and not aggressively call for heat to attempt to keep the oven interior stable.  When the oven is being vented, the controller will pause as to not over-react and overshoot temperature during this temporary event.

  • Read Temperature in degrees Celsius or Fahrenheit
  • Read Vacuum in Torr, Bar or Inches of Mercury

Independent Overtemp Failsafe Protection
The Cascade by Agrify Sciences CVO-5 is equipped with a heating cutoff system that will automatically stop power to the heaters when the oven shelf temps exceed 340°F or 170°C. This protection system will provide peace of mind for overnight processing or unattended vacuum bake outs.

NRTL Certification #U8 170464972 077. No Extra cost.
The CVO-5 Vacuum Oven comes certified by the Nationally Recognized Test Lab, TUV. This certification is a requirement by many municipalities and is often an extra charge on low cost ovens.

  • CAN/CSA-C22.2 No. 61010-1:2012
  • +UPD No. 1:2015-07 + UPD No. 2:2016-04
  • CAN/CSA-C22.2 No. 61010-2-010:2015
  • UL 61010-1:2012/R:2016-04
  • UL 61010-2-010:2015
  • EN 61010-1:2010
  • EN 61010-2-010:2014

Rigorous Quality Assurance in an ISO Certified, USA Manufacturing Facility
Cascade by Agrify Sciences manufactures our ovens in Oregon, USA. We are proud of our ISO 9001 Certification/Accreditation. Each oven completes a series of quality assurance procedures before shipment.

  • Chambers are vacuum tested after welding for vacuum integrity
  • Electrical & mechanical safety is thoroughly tested in compliance with TUV requirements
  • Functional testing verifies user settable items consistent with most lab protocols/usage models
  • Temperature verification includes calibration & temp chamber uniformity following ASTM standards
  • Units are cleaned and packed in ISTA tested, certified packaging materials 

Equipped for Inert Gas Backfill. Built-In Safety Relief
Introduce inert gasses such as nitrogen, argon, helium, etc. as part of your process via the ¼” rear vent barb. The maximum backfill flow pressure is 15 psi at the delivery port. In an overpressure situation, a simple, built-in safety relief allows gasses to escape via a spring loaded tempered window. This is not a positive pressure chamber.

Flexible Pumping / Feedthru Connection Ports
The CVO-5 ovens offer two different vacuum oven connection points. The standard connection is a 3/8th dia barb located at the rear of the oven. It is connected to the vacuum valve level on the front control panel.  For even faster evaporation, purging or drying consider upgrading to the optional MAXEVAP connection kit. The MAXEVAP connection kit secures to the oven’s rear 1” dia KF-25 port located on the back center of the chamber and can be installed anytime. The MAXEVAP connection never reduces flow by continuing with 1” diameter vacuum rated clear lines, a 1” dia KF-25 side mounted vacuum valve and KF-25 fittings and hardware. This KF-25 port can also be used to run temperature feedthrus, or monitoring sensors inside the vacuum chamber during processing.

Ergonomically Designed, Easy Quarter-Turn Valves
For anyone that has struggled with consistently turning the small, round, low-quality vacuum/vent valves, relief is in sight. You will love our large, quarter-turn vacuum/vent valves. Your wrists will thank you!

ANSI Rated Tempered Glass + USA Made Steel
Cascade by Agrify ovens are made in Oregon, USA with high quality materials. Our glass is NGI-USA Tempered and certified to ANSI Z97.1.2007  16CFR / 201 11. Our door handles are rugged brushed steel, not plastic. Our vacuum vessels are constructed with American made steel. We’ve tried lower cost, imported steel. But over time, vacuum chambers made of lesser quality/lower tolerance material cannot withstand the flex and pressure changes of vacuum pumping/venting/purging. This can deteriorate vacuum integrity and the oven will lose its ability to hold vacuum.

CVO-5 Vacuum Oven Features

  • NRTL Certified by TUV
  • 5 each adjustable shelves
  • Stable temperature control. Digital temperature readout with temp sensor INSIDE the oven
  • Bright LED lights in window for visibility of sensitive material
  • Touchscreen LED Control Panel with adjustable settings
  • Smooth, quarter-turn vacuum and vent valves
  • Energize vacuum pump from control panel
  • Rear KF-25 port allows for rapid MAXEVAP purging or running feedthroughs inside oven for monitoring
  • 120V or 220V power options are available
  • Quality Tempered Rated Glass NGI-US to ANSI Z97.1.2007  156CFR/201 11  SGCC -2577 ½ UA
  • Adjustable leveling feet insure your unit sits solid and level in the workspace
  • Stainless Steel option available
  • Made in USA

Agilent IDP7 Oil-Free Scroll Pump Features

  • Less noisy that diaphragm or oil-rotary vane pumps
  • No Inlet / Exhaust Filters Required
  • Hour Meter For Tracking Service Intervals
  • 1 Year Warranty
  • NRTL Certified
  • Expert Rebuild/Maintenance Available from Cascade by Agrify
  • Maintenance is the replacement of a single interior tip seal. Order our IDP7 Tip Seal Replacement Kit or ask us about our maintenance service.
  • Pull Deeper Vacuum / Better Vapor Tolerance With Two Gas Ballast Positions.The IDP-7 has two gas ballast ports that assist the pump in handling condensable gases such as water vapor, or other gaseous products that become liquids or solvents when reaching atmospheric pressure. With neither of the gas ballast ports open, the IDP-7 has a base pressure of 20 mTorr.
  • Port in position 1 provides for ~ 12 grams per hour of water vapor pumping, and limits the base pressure of the pump to not less than 200 mTorr.
  • Port in position 2 provides for ~ 120 grams per hour of water vapor pumping, and limits the base pressure of the pump to not less than 1 Torr.

Vacuum oven and pump are connected via our MAXEVAP connection – giving outgassing material the largest exit path off the product and out of the oven. The MAXEVAP connection kit features a large 1″ diameter oven exit port, KF-25 lines and a KF-25 precision adjustable vacuum valve to reduce purge and dry times.

CERTIFICATIONS


  • ISO 9001
  • NRTL TUV #U8 170464972 077
  • CAN/CSA-C22.2 No. 61010-1:2012
  • + UPD No. 1:2015-07 + UPD No. 2:2016-04
  • CAN/CSA-C22.2 No. 61010-2-010:2015
  • UL 61010-1:2012/R:2016-04
  • UL 61010-2-010:2015
  • EN 61010-1:2010
  • EN 61010-2-010:2014

1 Year (gaskets not included)

Model CVO-5


VOLUME:
4.5 Cubic Ft. (127 Cubic Liters)

SHELVING:
Includes 5 removable, adjustable (recommend 8 MAX)
Surface Area: 18″W x 24″D
Weight Capacity: 50 lbs (22.7Kg)
Aluminum

OVEN INTERIOR:
18”W x 24”D x 18”H
457mm x 609mm x 457mm

OVEN EXTERIOR:
25” W x 33.1” D x 33.1”H
635mm x 841mm x 795mm

WEIGHT:
360 lbs / 163.3 Kg

TEMPERATURE RANGE:
Operating Range: Ambient +26°F to 302°F / Ambient +14.4°F to 150°C

TEMPERATURE UNIFORMITY:
@ 105°F +/- 2.0°F
@ 200°F +/- 3.6°F
@ 300°F +/- 5.5°F

@ 40°C +/- 1.0°C
@ 90°C +/- 2.0°C
@ 150°C +/- 3.0°C

TEMPERATURE STABILITY:
@ 105°F +/- 0.2°F
@ 200°F +/- 0.4°F
@ 300°F +/- 0.2°F

@ 40°C +/- 0.1°C
@ 90°C +/- 0.2°C
@ 150°C +/- 0.1°C

HEAT UP FROM AMBIENT TO STABILIZATION TIME:
To 105°F (40°C) 60 minutes
To 200°F (90°C) 126 minutes
To 300°F (150°C) 180 minutes (170 minutes for 220V version)

COOL DOWN TIME:
From 105°F (40°C) 345 minutes
From 200°F (90°C) 285 minutes
To 300°F (150°C) 335 minutes (460 minutes for 220V version)

*Temperature performance specifications are preformed in empty ovens. Performance can vary in ovens containing product, ambient lab conditions.

VACUUM VALVE:
¼ Turn Lever

VENT VALVE:
¼ Turn Lever

INTERIOR LIGHTING:
LED Strips (Rated to 150°C)

GLASS WINDOW:
Tempered NGI-US to ANSI Z97.1.2007

VACUUM GAUGE:
Digital, selectable to read in inches mercury (Hg) or torr, barr

CONTROLLER:
Touch Screen
Accurate Within 1°F
Independent Overtemp Failsafe
Easy updates with USB port

PORTS (REAR):
Vacuum = 3/8th Barb
Vent = ¼” Barb
Auxiliary KF-25 Port

INERT GAS INTRODUCTION:
Yes. Via ¼” Vent Barb
15 psi max inlet pressure

POWER:
100V-120V 1ph 6AMP 1105BTU typical
Cord Included
NEMA 5-15 Power Outlet

1105 BTU/hr
Rating at max power

200V-240V 1ph 3AMP 1228BTU typical Available
Cord Included
NEMA 6-15R Power Outlet

1228 BTU/hr
Rating at max power

INCLUDED ACCESSORIES:
5 Shelves
20 Clips
4 Leveling Feet
Power Cord

DOOR GASKET:
18” x 18” Cured Silicone
Temp Silicone rated to 446°F(230°C)

SHIPPING DIMENSIONS:
41”L x 41”W x 45”H
Class 85
Shipping Weight: 449 lbs / 204 Kg

The CVO-5 (TVO-5) come in both low temp and high temp versions. The low temp version has excellent temperature uniformity for temperature sensitive material. The higher temp version, 220°C has a uniformity about 6.5% of setpoint. At time of order we will verify the high / low temp version you require.

*Temperature performance specifications are preformed in empty ovens. Performance can vary in ovens containing product.

CVO-5 PRO Vacuum Package

  • Cascade

Contact Us for Pricing

SKU:CS-1901010049

The CVO-5 PRO Package oven offers incredible temperature stability for vacuum drying and purging of pharmaceuticals, botanicals, slurries, or any temperature sensitive material.

This vacuum oven will liberate solvents, water or other unwanted compounds in a small batch, R&D, laboratory environments.

The CVO-5 PRO Package is available in Stainless Steel.